Here is a list of all functions with links to the files they belong to:
- g -
- get_CDC_Line_State() : USB_CDC_IF_ex.c, USB_CDC_IF_ex.h
- Get_Day_str() : time_utils.c, time_utils.h
- get_GPIO_in() : GPIO_in.h
- get_GPIO_in_edge() : GPIO_in.h
- get_GPIO_out_Idle() : GPIO_out.h
- get_GPIO_out_Mode() : GPIO_out.h
- get_GPIO_out_State() : GPIO_out.h
- get_IWDG_Period_ms() : WDG_ex.h
- get_IWDG_Period_us() : WDG_ex.c, WDG_ex.h
- get_Logic_in() : Logic_in.h
- get_Logic_in_edge() : Logic_in.h
- get_Logic_out_Idle() : Logic_out.h
- get_Logic_out_Mode() : Logic_out.h
- get_Logic_out_State() : Logic_out.h
- get_LR() : stack_utils.h
- Get_Month_str() : time_utils.c, time_utils.h
- get_MSP() : stack_utils.h
- get_pMSP() : stack_utils.h
- get_pSP() : stack_utils.h
- get_PSR() : stack_utils.h
- get_PWM_IC_DutyCycle() : PWM_IC.c, PWM_IC.h
- get_PWM_IC_Freq() : PWM_IC.c, PWM_IC.h
- get_R0() : stack_utils.h
- get_R1() : stack_utils.h
- get_R10() : stack_utils.h
- get_R11() : stack_utils.h
- get_R12() : stack_utils.h
- get_R2() : stack_utils.h
- get_R3() : stack_utils.h
- get_R4() : stack_utils.h
- get_R5() : stack_utils.h
- get_R6() : stack_utils.h
- get_R7() : stack_utils.h
- get_R8() : stack_utils.h
- get_R9() : stack_utils.h
- Get_Reset_Source() : exceptions.c, exceptions.h
- get_SP() : stack_utils.h
- get_TicksPerMicrosecond() : tick_utils.c, tick_utils.h
- Get_Weekday() : time_utils.c, time_utils.h
- get_Workload_load_perc() : workload.c, workload.h
- get_Workload_loop_period() : workload.c, workload.h
- getBreakout_char() : UART_term.h
- GPIO_in_handler() : GPIO_in.h
- GPIO_in_init() : GPIO_in.c, GPIO_in.h
- GPIO_out_Abort() : GPIO_out.h
- GPIO_out_handler() : GPIO_out.h
- GPIO_out_init() : GPIO_out.c, GPIO_out.h
- GPIO_out_Reset() : GPIO_out.h
- GPIO_out_Reset_Delayed() : GPIO_out.h
- GPIO_out_Set() : GPIO_out.h
- GPIO_out_Set_Delayed() : GPIO_out.h
- GPIO_out_SetStatic() : GPIO_out.h
- GPIO_out_StartBlink() : GPIO_out.h
- GPIO_out_StartPulse() : GPIO_out.h