arm_errors.h File Reference

ARM user errors. More...

This graph shows which files directly or indirectly include this file:

Enumerations
enum	FctERR {   ERROR_OK = 0 , ERROR_SPEED = -1 , ERROR_RANGE = -2 , ERROR_TIMEOUT = -3 ,   ERROR_VALUE = -4 , ERROR_OVERFLOW = -5 , ERROR_MATH = -6 , ERROR_ENABLED = -7 ,   ERROR_DISABLED = -8 , ERROR_BUSY = -9 , ERROR_NOTAVAIL = -10 , ERROR_RXEMPTY = -11 ,   ERROR_TXFULL = -12 , ERROR_BUSOFF = -13 , ERROR_OVERRUN = -14 , ERROR_FRAMING = -15 ,   ERROR_PARITY = -16 , ERROR_NOISE = -17 , ERROR_IDLE = -18 , ERROR_FAULT = -19 ,   ERROR_BREAK = -20 , ERROR_CRC = -21 , ERROR_ARBITR = -22 , ERROR_PROTECT = -23 ,   ERROR_UNDERFLOW = -24 , ERROR_UNDERRUN = -25 , ERROR_COMMON = -26 , ERROR_LINSYNC = -27 ,   ERROR_FAILED = -28 , ERROR_QFULL = -29 , ERROR_CMD = -30 , ERROR_NOTIMPLEM = -31 ,   ERROR_MEMORY = -32 , ERROR_INSTANCE = -33 , ERROR_DEVICE_UNKNOWN = -34 , ERROR_DEVICE_RESPONSE = -35 ,   ERROR_COM = -36 }
	Enum of low/mid level functions return state. More...

Detailed Description

ARM user errors.

Author

SMFSW

Copyright

MIT (c) 2017-2026, SMFSW

Enumeration Type Documentation

FctERR

enum FctERR

Enum of low/mid level functions return state.

Enumerator
ERROR_OK	OK.
ERROR_SPEED	This device does not work in the active speed mode.
ERROR_RANGE	Parameter out of range.
ERROR_TIMEOUT	Abort on timeout error.
ERROR_VALUE	Parameter of incorrect value.
ERROR_OVERFLOW	Overflow.
ERROR_MATH	Math error during evaluation.
ERROR_ENABLED	Device is enabled.
ERROR_DISABLED	Device is disabled.
ERROR_BUSY	Device is busy.
ERROR_NOTAVAIL	Requested value or method not available.
ERROR_RXEMPTY	No data in receiver.
ERROR_TXFULL	Transmitter is full.
ERROR_BUSOFF	Bus not available.
ERROR_OVERRUN	Overrun error.
ERROR_FRAMING	Framing error.
ERROR_PARITY	Parity error.
ERROR_NOISE	Noise error.
ERROR_IDLE	Idle state.
ERROR_FAULT	Fault error is detected.
ERROR_BREAK	Break char is received during communication.
ERROR_CRC	CRC error.
ERROR_ARBITR	A node lost arbitration. This error occurs if two nodes start transmission at the same time.
ERROR_PROTECT	Protection error.
ERROR_UNDERFLOW	Underflow error.
ERROR_UNDERRUN	Underrun error.
ERROR_COMMON	Common error of a device.
ERROR_LINSYNC	LIN synchronization error.
ERROR_FAILED	Requested functionality or process failed.
ERROR_QFULL	Queue is full.
ERROR_CMD	Command error.
ERROR_NOTIMPLEM	Function not implemented error.
ERROR_MEMORY	Memory error.
ERROR_INSTANCE	Instance error.
ERROR_DEVICE_UNKNOWN	Unknown device.
ERROR_DEVICE_RESPONSE	Inconsistent device response.
ERROR_COM	Communication error.